-
Basics with MR sound board
Im just a beginning to do solder MR boards to basic Luxeon III kit. Does anybody have a wiring diagram I can use to put together Luxeon III and MR sound boards? Just a basic. Nothing complicated.
-
Council Member
Jedi Master
Um....not to be rude, but I didnt even have to use the search function to find the diagram/thread for this. There are several threads on the first page of this section that have diagrams, pictures, puppet shows, coloring activities etc................
-
-
I didn't make myself sound clear. Is it possible to solder the sound boards to LEDs without using this.
It seems that this thread, it shows the diagram using Corbin board without using the parts I'm talking about.
http://forums.thecustomsabershop.com...ead.php?t=3976
Last edited by Matakin; 10-23-2008 at 03:34 PM.
Reason: Not making myself clear enough.
-
Jedi Initiate
If you are running the LED off of a driver board then the wiring harness can be safely tossed into your bits box and forgotten about. The MR board will be for sound only and the driver board will take care of the LED.
If you are running without a driver board (or buckpuck or resistor) you need that harness to get the power from the board to the LED. You could solder directly to the pins but that's silly when someone's already provided you with an easy connection.
-
-
That should answer my question cause that for that piece I've mentioned, the wire is about to break off and it's hard to get it back on. So I' thinking of getting rid of that.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks