I built my custom lightsaber from this store around 10 years ago. Its time for an upgrade and all the help is appreciated.

I currently have a MHS V1 setup with a Nano Biscotte V2 and a tri-rebel LED (blue) with a blue illuminated (ring) momentary switch (https://www.thecustomsabershop.com/1...itch-P616.aspx.)


I'm wanting to pull the cord on getting a PROFFIEBOARD V2.2 and the following parts from this store:


MHSv1 NPXL Hilt Side Adapter https://www.thecustomsabershop.com/M...temId=11406674

Pre-Soldered NPXL V3 Hilt side PCB connector - Long Pins https://www.thecustomsabershop.com/P...2369,2372,2373

BTF SK6812 RGB 144 LED Pixel Strip (x2) https://www.thecustomsabershop.com/B...temId=11406683

1" Thick walled Trans White parabolic Pixel blade tip https://www.thecustomsabershop.com/1...temId=11406684

40" LED blade diffuser for 1" thick walled blades https://www.thecustomsabershop.com/4...temId=11406685

Foam tube for 7/8" thin and 1" thick tubes V2 https://www.thecustomsabershop.com/F...temId=11406686

1" NPXL V3 Hilt Side Adapter https://www.thecustomsabershop.com/1...Kits=2363,3291

Pixel PCB - blade side https://www.thecustomsabershop.com/P...temId=11410310

Will this fit my MHS v1 1" blade holder and work together? Am I missing anything?