Hi everybody i bought recently some parts from tcss store for building my sinktube graflex replica :

There is my parts list :

Prizm sound board
2 watt 20mm speaker
18650 battery ncr pannasonic + charger
i have a battery pack for the 18650 3,7v 3400 mah battery
tri-cree led MBTCLED : Red die, Green die, Blue die
18 degree rebel cree trans lens
12mm Anti Vandal Momentary Blue Ring Switch
USB to 3.5mm R.I.C.E.? cable
Power Xtender? 2.0
Tamiya to JST charger adapter
Graflex Red Button Replica Thumbscrew
2.7ohm 10w resistor
20mA DynaOhm? Variable Resistor
3/4" D-Ring
1 inch blade with 1 inch blade white film
BuckPuck 1000mA 6-wire
3.5mm R.I.C.E.? Port Style 1

I will need to bought :

1.25 od sink tube
pvc pipe for the main bodies
and other parts

so My first question is for my 1000ma running led it ok for my circuit how i bought

0.47ohm 5w resistor x2
1.2ohm 3w resistor x2

x2 for eventuality error

i would like to to have some diagram because i want to put a kill key on my setup and my momentary blue ring switch
i want to put a momentary switch for blaster shock and force sound did you know help me with that

thank you for advance help i will put some photo of my design of my lightsaber.