Nano Biscotte problem

[Vylar]

I'm working on a custom build using the Nano Biscotte. When I finally got everything wired up, the blade LED doesn't work, and the speaker makes only crackling noises. I have verified that the LED works using a single AA battery. I also double and triple checked my wiring and I am pretty sure I have it right (though I could be wrong). While I was examining the board, I noticed that a couple resistors appear to be crooked and the solder might be connecting them.

I have uploaded a photo of the board (higher resolution) and a diagram of how I have wired everything together.

Could someone tell me if A) the board might be defective due to the resistors and B) I have wired everything correctly?

Thanks!

-Vylar