Been ages since I've been here but Back nevertheless to make a saber. Aiming to work with the NB soundboard, though before I got this all done up (along with making sure I'm all set to buy the parts, I just wanted to run my list here in case I have anything unnessessary in the list, or if I'm missing anything at all that should be included:

- MPS Pommel style 10
-Hilt style 3 with guarded style switch hole
-MHS choke style 1 short
-Screw on LED blade holder style 20
MHS "new style" Heat Sink V3 (Tri-Rebels)
-16mm Anti Vandal Momentary Nickel Plated Switch
-Activation box style 9
-Machined button for Covertec clip
-Luxeon Tri-Rebel Star (Green/Green/White)
-Luxeon 18deg Tri-Rebel Star Lens
-8-32 x .3" anodized thumb screw
-2-56 Button Head Screw
-MWS Pre-Wired Nano Biscotte Sound Module(Light Meat)
-Li-Ion 18650 3.7V 2600mAh PCB Protected Rechargeable Battery Module
-Constant current LED driver (1000mA, Momentary)
-MHS speaker mount V2
-Premium Speaker
-2X JST female connectors with shared ground x4
-JST Connectors x6
-LED "Corbin style" Battle blade 1" OD (32 inches)
** Double Wrap
** Standard

Been going over this for a total of 8 hours and despite my best efforts I get a nagging feeling something isn't quite right, like something is missing. Hoping I can get pointed in the right direction if possible