The 2012 TCSS Saberbuilding Contest Poll - MHS

[Lord Maul]

Here are the entries for the MHS category, seven in all. You only get ONE vote here as well, so make it count!

1. Saber name: Ember

Specs:
4x AAA 6v
Luxeon Rebel Star (Deep Red)
Luxeon Collimator Lens 5 deg viewing angle
TCSS Premium Speaker
Machined button for Covertec clip
Mace Windu Electronic Lightsaber sound board
Red illuminated LED ring latching switch
Blade was a Corbin style TCSS show blade, but i ended out taking out the Corbin film and replaced it wit 7.5 feet of cello wrap (poly p)
The plug is a norelco electric shaver head glued into a small piece of clear pvc tube
The shroud & overlay is a hand cut sink tube powder coated flat black




2. Saber name: Emerald Fire

Specs:
2x 3.7 li-ion batteries
premium speaker
Novasound 3.0 dark
Green SPST momentary switch
Red accent LED
Soeul P4 green LED
3mm RGB flashing in series with red and green 3mm side accent LEDs
Italian leather handle with gold pin striping
Kill key/recharge port




3. Saber Name: Young Hero

Specs:
PC-U v1.6
DX RGB (9watt) Wired for Yellow
Premium speaker
2x Style 22 Switches
Custom Laser Engraving by Tim says, "Jedi Drew" in the choke
7.4v Li-on Pack (2x 14500)
Recharge in pommel
Saberworks RCS




5. Saber name: Feroce ma Elegante (Fierce but Elegant)

Specs:
CFv5.10
fonts are Hero, Korriban, Shatterpoint, Blackstar, TFU Starkiller, and Brawler
Purple AV Switch
exposed purple quartz crystal in choke.
Ledengin RGBA, RB for purple, green for FOC
arkm custom brass blade plug.
real leather grips.
PVC chassis/w 2w bass speaker.
trans gold powdercoating, and black enammel baked.




6. Saber Name: Kast Bavvyk

Specs:
PC 1.5
Makoto Sai V3 Green
Premium speaker
Momentary orange ring short AV switch
2xAA Batt holder
2x Trust Fire Batts




9. Saber name: Scintilla

Specs:
MHS based saber
Hasbro FX Mace Windu 2007 board, modified for higher mA output
LED Engin RGGB wired for G//G
2W Bass speaker on Reverse Sound setup with sound venting under the front overlay
4,8V NiMh battery pack with recharge port and custom kill plug
Crystal Pommel
Razor style blade plug
Latching switch wired to illuminate in idle mode
Powder coated brass and painted/baked pommel and emitter accent areas




10. Saber name: Raxis Primal

Specs:
PC 1.6
Shatterpoint/Ancient saber fonts
LEDendgin RGGB
GG in series with red FOC
green crystal 5mm LED
FOC\lockup indicator red 3mm LED
Slow changing RGB 5MM below chamber for power source.
2 trustfire Li-Ions
recharge port in custom pommel
rotating overlay chamber reveal
natural rayskin grip
Olive and wrinkle black weathered powdercoat