Ok, so I am not very good with electronics so I need some help here. I want to wire up these together and I need to know how to wire them and how much voltage I will need: a Red Luxeon Rebel Star (700ma 2.3v), a DPDT red ring AV latching switch (forward voltage of 2.1v and runs at about 20ma), an Obsidian sound board from Ultrasabers (accepts any voltage up to 12v), and I want to use a buckpuck (from what I understand is I have to use a 700ma buckpuck with the red rebel star). So how would I wire that and how much voltage would I need to power it. I'll also attach a picture of what my saber will (hopefully) look like without the sleeve since the new saber builder doesn't have a sleeve option. Thanks for your help!

Sev95


Custom Saber'.jpg