New style hasbro saber!!! Please help!

[cannibal869]

Great! Very easy to understand. Many thanks. Do you ever encounter a problem with either the board or the LED driver not responding to a push of the switch, resulting in the one being off while the other is on? Obviously, you can easily reset it with the master switch, but I'm just wondering. I have one of these now, and am amazed at the size. If you were to forgo the TCSS LED driver and just use a resistor, you could, theoretically, fit everything you need (except the speaker) into a pipe with an internal diameter of just 3/4" (19mm). Pretty mind-boggling. People who are converting korbanth's hilts will definitely want to consider this cheap, tiny soundboard.

Well, actually, you know it's much more likely that the hasbro board will automatically shut itself off (built in timer function), leaving the LED on. Again easily fixed with the master switch, but I've found that you can also quickly cycle the momentary to get both boards back "into sync" so to speak.

And yes, these boards are quite small, which is a great thing indeed!

Oh, BTW, the momentary switch in that diagram should be rotated 90 degrees - i.e. if you bend the "legs" of the switch out flat, the leads should be like this

orange---switch---purple
orange---switch---purple