quick question, sorry if this makes me an electronics simpleton, but I'm learning :P

Im going to be using a 7.2V battery setup with a Lux V led and a blue illuminated switch. The resistor chart says that i need a 220 Ohm 1/4 Watt resistor for the blue illum switch, but it also says that I need a 1 Ohm 2 Watt resistor for the main LED (I have to pull up the main LED in the chart to see this). So my question is, do i need both of these resistors for this setup, or is the wiring diagram given for the illuminated blue switch's resistor sufficient?

Any pictures of someone using a similar setup would be most helpful