Darth Nihilus saber

[Juliusthegreat]

Here is a KoTOR saber http://forums.thecustomsabershop.com...ead.php?t=7445 and another version of the Nihilus saber, it is like a cross of the KoTOR saber and Nihilus saber. http://forums.thecustomsabershop.com...ead.php?t=8040 You will probably not be able to make one too close with MHS parts but almost every Saber Smith has a version of them.

They are both good, now the hard part is to find out what parts would be needed or used. I´ll see if I can figure out something.

[Juliusthegreat]

Here's one I got awhile back. No room for sound in it though..

This one is great, too bad that there is no room for sound. Did you get the parts here or is it custom made?

[Vos Malek]

It's custom made. I actually picked it up on ebay.

Honestly I probably could fit sound in it with a small speaker, around 1". The problem is I can't get the pommel off, which holds the switch. I'm afraid I'm going to damage it trying to yank it off.

[Juliusthegreat]

Is this the type of Nihilus you are talking about? http://forums.thecustomsabershop.com...ead.php?t=7493

Sorry sorry sorry
I must have been looking at too many pictures at the same time. This is what I am looking for. So getting parts like that here might be hard or?

Here is another pic I found that looks alot likes yours:

http://yfrog.com/5enihilussidedarkj

[Rhyen Skytracker]

That one is mine. Looks like they squished it a bit. It is a little longer than the picture makes it look. Those are all custom parts. That was actually one of the first sabers I machined myself.

[Skottsaber]

Well I was playing on the MHS builder to try and copy the image you posted and this is what I came up with:



You would have to do the diagonal shroud yourself and I think you could use the MHS Tonfa adapter as a pommel. What do you think?

[Juliusthegreat]

Well I was playing on the MHS builder to try and copy the image you posted and this is what I came up with:



You would have to do the diagonal shroud yourself and I think you could use the MHS Tonfa adapter as a pommel. What do you think?

I think you have done a good job, thanks

[Skottsaber]

My pleasure

[Juliusthegreat]

My pleasure

Now I need to try copy your picture myself on the MHS builder . Do you remember what parts you used?

[xl97]

you dont think you could.....ummm....figure it out?



*tip: turn of thread hints once you understand how the parts 'screw' together.. so you renders dont have theads patterns in the images.