Guarded or Standard

[astromech_kuhns]

i dont get the whole soundcard and light talk...im so stupid with stuff like that. What does a driver do?

and also i have one of those crappy make your own lightsaber things from hasbro..Would that sound card work?

different topic, but, yes you could use the sound board from that for a saber, and a driver regulates current to the LED. a buck puck will work fine, you should check out ohms law. then read up on some of this.

[Crystal Chambers]

Back on topic...

I thought AV switches could be mounted flush but it takes some machining. Otherwise you need a box or bezel. I have seen it done. I might be crazy but I'm pretty sure I'm not that delusional..lol

[Vos Malek]

Back on topic...

I thought AV switches could be mounted flush but it takes some machining. Otherwise you need a box or bezel. I have seen it done. I might be crazy but I'm pretty sure I'm not that delusional..lol

That would be with Fenderbender's super secret short avs that he gets overseas.

[runner4life]

u guys have completely lost me with all that button talk n stuff

[Rhyen Skytracker]

Yep, Fender has some short AV switches. There is no way to machine the part to make it bigger on the inside than it is on the outside. This is not the Tardis from Doctor Who. LOL

[FenderBender]

LOL! Tardis


There are different AV switches out there, I'll have to order a couple of the new ones Tim has and see if they can be shoehorned in without a bezel or box. Otherwise, yup it takes a short one like the non lighted gold plated one sold in the store to fit flush. Even then, the tolerances are REAL tight when countersinking the 5/8 hole for the switch. When I do it, if I go to far it almost ruins the hole.

[Rb-wan Organus]

Runner you need to do alot of reading...LOL.
Start here: http://forums.thecustomsabershop.com...splay.php?f=35