Hi folks. I was taking apart my first ever build, using the TCSS 1.25in Sink Tube Blade Holder and was considering using the same BladeHolder to make a Light Spear/Yuri. Only issue I can find is:
1. How to keep the battery pack safe and sound down the length of the 4-5ft of tube needed for the spear body?
2. Where to find a PVC or other light weight tube that will fit the 1.25in BladeHolder. I can find tons of cheap PVC in the 1.5in range, but the spacing means having to find a filler to make the contact flush between tube and Holder. I know the simple option would be a wooden spear shaft with a small coupler section of sink tube at the tip to allow for the BladeHolder, but there must be other options that won't get too heavy.
Any suggestions?
Bookmarks