LED choices:
1. Luxeon 3 all colors white/blue/green (1000mah)
2. Luxeon 3 red/amber/red-orange (1400mah)
3. Luxeon 5 (850mah)
4. Luxeon K2 (1500mah)
5. Luxeon 3 Overdrive (1200mah)
IMPORTANT! (be sure to select the correct LED type installed in your saber)

Battery input voltage:
Maximum for board = 9.6V
Minimum/Maximum for Luxeon 3, K2, P4 = 4.5V / 7.2V (6V recommended)
Minimum/Maximum for Luxeon 3,P4 Red/Amber = 4.8V / 6.0V
Minimum for Luxeon 5 = 7.2V
IMPORTANT! (be sure to use the correct voltage/power with corresponding LED type)

And notice the max board voltage is 9.6 so I should be well under. It has to be something else. Which is the correct setting for a blue p4?
This is just not adding up maybe I'm missing something like my wires to the p4 touch the star or possible bridge in the accent led aside from that I'm stumped.