First Saber Parts List (Check)

[$tarkiller]

Oh, I made a mistake in my post...corrected. I meant to say 5 degree instead of 10.

Oh ok. No worries. I tried filing mine, but to no avail.

[B5813]

Don't worry about the lens holder/lens issue. Once you screw the blade holder down over the assembly everything will come together tight anyway. I just stick my finger down the blade holder and press against the lens holder to make sure it's flat on the lens while I twist the blade holder.

[Sunrider]

Yep if you file around the underside lip where it binds with the holder & take a tiny bit off the top where the clips lock down it is ok. & J Lo it's Dude

[Jedi-Loreen]

Of course I know that, I was being silly. I'm even a Spelling and Grammar Nazi to myself. Can't you tell a deliberate typo from an accidental one? Or one where someone really doesn't know how to spell something properly?

And, don't start a sentence with a symbol, type out the word.

[Sunrider]

No actually. I Don't know how I would tell a deliberate tipo from an accidental one.

[Sairon]

Yep if you file around the underside lip where it binds with the holder & take a tiny bit off the top where the clips lock down it is ok. & J Lo it's Dude

Lol, I filled down my holders for five degree's but they won't stay. My advice to you is super glue them in.

[Jedi-Loreen]

NO!!

DO NOT USE SUPER GLUE.

You will end up fogging up part of the lens that way.

I know that because I tried that once when my lens holder cracked.

A couple small dabs of epoxy would probably work.

[Shadar Al'Niende]

For my saber I used superglue adhesive gel to attach the lens permanently to the star skipping the holder....

Worked for me but i suppose i just got lucky

[Jedi-Loreen]

You might get lucky with the gel, but definitely not with the liquid.

I wouldn't take the chance.