is eveything i need here????? plz look at it :)
Screw on LED blade holder style 10
4AA Battery holder
Luxeon Collimator Lens 5 deg viewing angle
Luxeon III/V Lens Holder
2.2ohm 5w resistor
SPST Latching Guarded switch with red button
MPS Insert style 9
1" Hilt safety plug
MHS choke style 3
2 Wire quick connector
7" Fluted with guarded style switch hole
Luxeon III Star red
Covertec Clip and knob
MPS Pommel style 7
ultraEdge blade
MPS Clip
plz right back
Yay, you figured out how to start a New Topic.
You do know you can't buy an Ultraedge blade in this Store, right?
I don't see a blade retention screw in your list. You need one of those to keep your blade from flying out when you swing your saber around. And you'll need the Drill and Tap service for putting the threaded hole in the blade holder if you don't to do that yourself.
I guess you won't be wanting to carry this saber on your belt, because you don't have some kind of D-ring or Covertec knob and clip on your list, either.
Otherwise, your list looks ok to me.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Originally Posted by kurtsea
Screw on LED blade holder style 10
4AA Battery holder
Luxeon Collimator Lens 5 deg viewing angle
Luxeon III/V Lens Holder
2.2ohm 5w resistor
SPST Latching Guarded switch with red button
MPS Insert style 9
1" Hilt safety plug
MHS choke style 3
2 Wire quick connector
7" Fluted with guarded style switch hole
Luxeon III Star red
Covertec Clip and knob
MPS Pommel style 7
ultraEdge blade
MPS Clip
plz right back
He's got a covertec clip and knobYay, you figured out how to start a New Topic.
You do know you can't buy an Ultraedge blade in this Store, right?
I don't see a blade retention screw in your list. You need one of those to keep your blade from flying out when you swing your saber around. And you'll need the Drill and Tap service for putting the threaded hole in the blade holder if you don't to do that yourself.
I guess you won't be wanting to carry this saber on your belt, because you don't have some kind of D-ring or Covertec knob and clip on your list, either.
Otherwise, your list looks ok to me.
i know i'll bye the blade on Ultra sabers
Covertec knob and clip is on there
i am using a set screw
To clarify, are you purchasing the set screw from here?
Also, will you be drilling and TAPPING the hole yourself?
Tapping is the process of adding threads to a hole, so that way the screw will... screw into it
yep i know thx will eveything work???
Wow, I guess I need to clean my glasses.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
will all the voltage and elctronic like that work together????????
You're getting the Build Your Own Luxeon III Electronics Kit? That looks like all the separate parts in the kit on your list.
Yes, the kit is designed so that it all works together. Not sure why you're asking if it does.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Be advised that an UltraEdge from Ultrasabers will not fit the TCSS blade holder socket without either sanding the bottom of the blade, or the inside f the blade holder.
Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
Posting Permissions
Reply With Quote
Bookmarks