Newbie

[lu-ho]

Hi all,

As a lightsaber builder want to be, i read whole bunch threads before making a list of a very basic saber.

Please check them for me

- corbin combat blade
- MHS main body style 12
- pommel 12
- insert 5
- blade holder style 8
- p4 LED kits


am i missing anything?
or am i completely lost??

thank you in advance

[FenderBender]

Pommel clip ring
Blade retention screw (and add the drill and tap service if you don't do it yourself)

[acerocket]

Hi all,

As a lightsaber builder want to be, i read whole bunch threads before making a list of a very basic saber.

Please check them for me

- corbin combat blade
- MHS main body style 12 (there is no main body 12)
- pommel 12 (there is no pommel 12)
- insert 5
- blade holder style 8
- p4 LED kits


am i missing anything?
or am i completely lost??

thank you in advance

You need to check a few part numbers/names.

You will need some sort of screw to hold the blade in. You may want to have the hole drilled and tapped by the store if you don't have the tools. Since you are getting a switch in the P4 LED kit, you want to make sure you get the correct main body (one with a standard switch hole). Other than that, you need an MPS clip to hold the insert in. That's about it for a basic saber. Oh, and if you are usin an insert, you want to make sure you get an MPS pommel and not the Pommel style 1 or Pommel style 2 as those are for switches.