I bought a rechargeable 6v battery to power my Seoul P4 white LED and now i'm not sure how to recharge it? what connections should I use? what charger? The battery looks like this:
http://vi.ebaydesc.com/ws/eBayISAPI....mdbattery&ds=0
any help?
I bought a rechargeable 6v battery to power my Seoul P4 white LED and now i'm not sure how to recharge it? what connections should I use? what charger? The battery looks like this:
http://vi.ebaydesc.com/ws/eBayISAPI....mdbattery&ds=0
any help?
Also any help on wiring this rechargeable batt. I have all the parts (I think) but not quite sure what to do. I don't want to blow my LED. like this?
1st off, with that setup, just plug the battery pack to the charger only.
2nd why did you pick that battery pack, there are better-cheaper packs available on the net. You should have asked here in the 1st place.
I'M JUST A SPY(LOL)
Well the pack fits into my saber (its less than 3/4") and still gets the 6v i want also i want to (semi)permanently install this in the saber and recharge it through a normal 5mm charger jack. BTW my batt. pack is not side by side but on top of each other like my err umm diagram. Any ideas or help?
Get this from the shop; http://www.thecustomsabershop.com/21...-Jack-P37.aspx
and use this to wire it up; http://forums.thecustomsabershop.com...ead.php?t=2235
I'M JUST A SPY(LOL)
Thank you so much!!! I don't know why I could not find that before!!! I might even board this thing too! well perhaps my next one.
Forgot to mention, you can get this as your kill plug and recharge port adapter;
http://www.thecustomsabershop.com/21...plug-P253.aspx
I'M JUST A SPY(LOL)
Bookmarks