If you are going to use the US (Ultrasaber) board with a LuxV you will need to use LiIon (Lithum Ion)batteries in order to get the 7.2 volts required by the board, and you will need a charger that is specific for LiIon Batteries to plug into the recharge port. Rather than using a recharge port/kill plug, I would recommend just using the separate charger (specifically the one in Tim's store) and take out the batteries to charge....(or have two sets...) Otherwise if you definately want to use a recharge port with a plug in style charger so that you charge the batteries in the hilt....you will either need a charger that will charge LiIon, or change to this battery holder: http://www.thecustomsabershop.com/6A...der--P152.aspx or some other way of reaching the requisite 7.2 volts output on the US board.
Bookmarks