Quote Originally Posted by Matt Thorn View Post
I'm glad you found it useful.

Yes, you can attach the leads of a latching switch to one of the middle pins and one of the bottom pins.

It doesn't matter which, and for purposes of soldering, it might be easier to go diagonally. The two top pins are not used (as far as I can tell--there might be something going on on the other side of the board, but I doubt it, since it's a simple OFF-ON switch). Hope this helps.
Hi Matt

Just to be clear a can solder to either the top left and top right or bottom left and bottom right. Not both.

If that's the case you just answered a five month question that I've thrown out there soooooooooo many times you would not believe....

Edit: Should have read that again, soooo stupid. I get what you mean now.

Matt. Thank you very much.