Results 1 to 4 of 4

Thread: MR/Hasbro FX Wiring Diagrams

  1. #1
    Council Member
    Sith Lord
    Lord Maul's Avatar
    Join Date
    Jun 2006
    Location
    Seattle area, Washington
    Posts
    5,168

    Default MR/Hasbro FX Wiring Diagrams

    This will be run like the cheapy Hasbro thread. PM me with submissions. This thread won't get as full, as there are only so many boards.

    Credit goes to Tim.



    2005 MR Luke

    Should be ran off of 4.5-6v. You do not need to use the LED output of the board. If you do use the output the LED may be ran at too high or too low of amperage.
    Aluke123 on every other forum - Old grumpy moderator here

    Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!

  2. #2
    Council Member
    Sith Lord
    Lord Maul's Avatar
    Join Date
    Jun 2006
    Location
    Seattle area, Washington
    Posts
    5,168

    Default

    Credit goes to Matakin.

    Aluke123 on every other forum - Old grumpy moderator here

    Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!

  3. #3
    Council Member
    Sith Lord
    Lord Maul's Avatar
    Join Date
    Jun 2006
    Location
    Seattle area, Washington
    Posts
    5,168

    Default

    Thank you Jay Gon for these latest diagrams

    Here's a diagram for a 2007 Yoda FX soundboard:



    Here it is with the clash sensor attached....if possible, solder the clash directly to the board on the bottom of the header for the blade connector. It'll make it much easier to install.

    Here's a diagram for a Vader/Maul/Anakin ROTS/Obi-wan ROTS/Luke aNH:


    Pic of a Luke ANH/Obi-wan ROTS w/better wiring diagram:


    (That's what this topic is for, guys! )
    Aluke123 on every other forum - Old grumpy moderator here

    Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!

  4. #4
    Council Member
    Sith Lord
    Lord Maul's Avatar
    Join Date
    Jun 2006
    Location
    Seattle area, Washington
    Posts
    5,168

    Default

    Thanks to Shadar Al'Niende for this diagram of the Asajj Ventress FX

    Aluke123 on every other forum - Old grumpy moderator here

    Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •