the thing is i tried it the reverse and no light comes on at all.[]
"ah general kenobi you are a bold one"-general grievous[xx(]
the thing is i tried it the reverse and no light comes on at all.[
"ah general kenobi you are a bold one"-general grievous[xx(]
I didnt notice you said you had a different model. I have seen some where the polarity is reversed. Not sure how yours should be hooked up.
Tim
The Custom Saber Shop
can anyone help me with my darth vader 04 model conversion[]
i have a problem with the led hookup it is soldered but when you plug the blade connector in the sond is grumbly and the led flashes on and off.
You already know that is is wired incorrectly or it wouldn't act like that. You need a multimeter to check eacy wire to determine if it is positve or negative, use the volts setting to measure it. Sorry that is the best I can do because your board is not in front me.
Do-Clo
Brotherhood of the Sith
Don't make me destroy you...
ONCE I KNOW HOW TO POST PICS I COULD SHOW YOU THANKS DO-CLO[
ONCE YOU UNPLUG THE CONNECTOR THE SOUND GOES BACK TO NORMAL.
you know how to use the edit button, right, dacota?
i am a nerd, if you don't like it, i will cut you with my lightsaber
What's with the Caps?
And what's with the "[" in front of every one of your posts?
Take a pic, (a good pic) or draw a photoshop wireing diagram of how you have this wired. It will help us brainstorm.
If you need help posting he pics, there is a pic-posting topic that should help.
I think you can now load them directly onto this sight, but I have yet to try.
Have you read your Thread Index today?
FAQ
Official Designated TCSS Jester!
I don't think it will make a difference, you need to meter the wires to find out what is positive and negative.
<center></center>
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by james3
I don't think it will make a difference, you need to meter the wires to find out what is positive and negative.<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
I just think better if I have something to stare at...[]
Have you read your Thread Index today?
FAQ
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by DACOTA
[ONCE I KNOW HOW TO POST PICS I COULD SHOW YOU THANKS DO-CLO[
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
You can send pictures all day long but without it in front of me I can just guess you must take the time to use a meter and test each individual wire. You must also unwire your current conections and I think you will find that your sound works correctly then. Sorry to tell you this but, THE LED IS WIRED WRONG!
Do-Clo
Brotherhood of the Sith
Don't make me destroy you...
Posting Permissions
Reply With Quote
Bookmarks