"Filling The Gaps"

[cardcollector]

Ok, this question may sound a little weird and like "He needs to do more googling" etc. But I do need some help as I have searched for a while

I have been looking for a good "gap filler" for the space between the 1 1/4" sinktube and the 1.5" sinktube. Polywashers work OK but are not really what I am looking for.

Ideally, I would like some aluminum tubing (I don't really care about the price right now.) that would fill the gaps.
Sooooooo...

Does anyone have any other ideas for filling the gaps?
And, Does anyone have a reference or even the Dimensions of the Aluminum Metal tubing I would need?

Thanks in advance!
CC

[vargose]

standard MHS parts, or at the very least the 1.5 sink tube adapter.

1.25 fits on the inside and 1.5 fits on the outside

[cardcollector]

Ok, but that's not exactly what I'm looking for, it is too short...

I'd like Tubing at least 6" long so I can cut and fill where I need to.

Basically I thing what I'm asking is-
1.) What is the OD of the 22 gauge 1 1/4" sinktube and the ID of the 1 1/2" 22 gague sinktube.
and then
2.) Where can I get something (preferebly metal) to fill the space between the two.

Sorry if I'm not communicating my questions clearly.

[TimeRender]

http://www.onlinemetals.com/merchant...p=2&top_cat=60

[cardcollector]

Just like that? No flaming, no sarcasim? AWESOME!!!!
Now all I need are the dimensions... Anyone?

[TimeRender]

I'm not sure what you mean, it seems to me that you already have the dimensions. Keep in mind that you won't be able to get a metal tube that will fit your pieces exactly, but with some sanding and elbow grease you can make it work.

[Rhyen Skytracker]

It works great with the 22 guage sink tube but not with the 20 guage sink tube.

[Rhyen Skytracker]

You will probably have to have a piece custom made.

[cardcollector]

Well I know the title of the sinktube-"1 1/4" but is that the OD?
Same for the "1.5 sinktube". I think its the OD but am not sure... I would still need the ID.

Whenever I googled it I just got places to buy it...

[cardcollector]

I didn't think a tape measure would be accurate enough but I guess It doesn't have to be exact... just close. Right?