just to get this straight- say i wanted a blue lux 3 LED- i would go with this resistor:
http://www.thecustomsabershop.com/22...stor--P11.aspx
and 4 AA batteries?
quick question- how to know which resistor to use?
just to get this straight- say i wanted a blue lux 3 LED- i would go with this resistor:
http://www.thecustomsabershop.com/22...stor--P11.aspx
and 4 AA batteries?
Last edited by Sidious_999; 07-19-2009 at 07:24 AM.
Got a Question? There's a thread for that...
~Do what you can, with what you have, where you are.~Teddy Roosevelt
SollusVir everywhere else... FXsabers, Youtube, etc...
-doesn't answer my question
How does the chart not give you exactly what you need to buy?Originally Posted by Sidious_999
You cross reference BLUE LUX III and 6volts (or whatever volts you are using)
Sorry, but this forum will not spoon feed you simple answers that can be easily found.
Cheers!
Lonewind
it doesn't answer my question because i was asking AM I CORRECT?
i know how to cross reference- im just asking if im correct- jeez
The chart is correct.
Cheers!
Lonewind
but am i right with the right resistor and the right batteries- double and triple a batteries have 1.5v's right?
Yes, AA and AAA are 1.5 volts each.
The Lux 3 Blue needs at least 3.9 volts to run well so the resistor keeps it from frying when you go above that voltage.
Cheers!
Lonewind
Posting Permissions
Reply With Quote
Bookmarks