Ok, so I decided to make my own lightsaber, and I need some help with it.
Basically, I've limited myself to two choices.
The first, which is my personal favorite, has less space than the second.
Here are the parts for the two designs:
Lightsaber 1:
Screw on LED Blade Holder Style 8
MHS Choke Style 1 Short
MHS Ribbed Extension V-Grooved
3 Inch Double Female Threaded Connector
MHS Gear
MPS Pommel 3 v2
MPS Insert Style 6
Lightsaber 2:
Screw on LED Blade Holder Style 8
MHS Choke Style 1 Short
Double Threaded Hilt Style 3
MHS Gear
MPS Pommel 3 v2
MPS Insert Style 6
I want to know if what I want in my lightsaber is going to fit in Lightsaber 1, or Lightsaber 2 for that matter.
Also, I have an Idea of how to do so, but I'm not 100% sure as to how to wire it, or if it'll even work with this equipment.
This is the List of the things that will be added (this applies to both hilts)
Luxeon III/V Lens Holder
Luxeon Collimator Lens 5 deg viewing angle
Luxeon III Star
DPDT Latching blue illuminated switch
Activation box style 4
MHS sound/speaker/battery combo
2.1mm Power Jack
(The location of the illuminated switch: Lightsaber 1 - Center of the 3 Inch Double Female Threaded Connector / Lightsaber 2 - at the location of the switch hole on the Double Threaded Hilt Style 3)
So my questions are...
Will this all fit in Lightsaber 1?
Will this all fit in Lightsaber 2?
Is there anything I'm missing in the list?
How well will these all work together?
What, if anything, can be changed to improve the performance of these parts?
What can be done to get the brightest blade color?
URGENT: Could someone make a wiring schematic for these parts in my lightsaber? (Keep in mind that the lightsaber is rechargeable)
Bookmarks