Ok guys, here is what I have found..so far
For the most part battery issue seems solved..if you pop the last battery in the board boots..
Blade lockup flash is as bright as without now..
Switch issue..not fixed at all.
The standard momentary..cant even use decently after programming
The lighted ones are as bad as the standard ones
The guarded style.. work pretty good but still have the occasional glitch
The tactiles work fine still (switches 16 and 17)
When using the standard or lighted ones.. They will start up but then after you have hit blade lockup once or twice they will either Reboot or power off weird (in which case you need to cycle the batts a few times)
In my opinion any and all momentary switches should work and I will keep fighting to get this fixed. For now the remaining stock will be sold the way they are though.
Bookmarks