Results 1 to 4 of 4

Thread: Question about Makoto style saber.

  1. #1

    Default Question about Makoto style saber.

    This is an EL style saber am I correct in this? If I was to remove the blade and cut the led wires, placing a quick connect in there would this damage anything powering on w/out the blade connected?

  2. #2

    Default

    someone correct me here, but im pretty sure the Makoto style uses strings of LEDs, not EL

  3. #3

    Default

    Thank you. I was confused. I will post on the correct thread.

  4. #4
    Council Member
    Jedi Council Member
    Jedi-Loreen's Avatar
    Join Date
    Dec 2005
    Location
    Not of this Earth
    Posts
    6,077

    Default

    Um, that second question that made no sense to me.

    Makoto style blades are indeed LED strings. You need to read up on those some more.

    Also, EL and LED electronics are not compatible.

    LEDs run off of DC.

    EL runs off of high frequency AC current and needs an inverter for that.
    In order to see the Light,
    you must sometimes risk the Dark.
    TCSS MODERATOR


    BLUE 8 Ready to ROCK and ROLL!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •