I recently had an idea- It may be a crazy/useless one. But then again it may be BRILLIANT!!!
So here it is: How about making a waterproof lightsaber???
Is it possible?? What do you think??
Waterproof Saber??
I recently had an idea- It may be a crazy/useless one. But then again it may be BRILLIANT!!!
So here it is: How about making a waterproof lightsaber???
Is it possible?? What do you think??
Got a Question? There's a thread for that...
~Do what you can, with what you have, where you are.~Teddy Roosevelt
SollusVir everywhere else... FXsabers, Youtube, etc...
With no sound, I think it is definitly posible if everything is sealed.
New to the forum: READ, READ, READ! it's the best way not to get flamed.
Time for a kirby dance <('-'<) (><) <('-')> (>'-')> (>'-'<)<('-'<) (><) <('-')> (>'-')> (>'-'<)
You didnt say it had to have electronics, so yes it is possible. Get one from Random sabers, and an acrylic blade. There ya have it.
Prepare for major PWNage.
If you need any help with anything, whatsoever, click here. This should help you.
Definition of n00b- Here.
Sure it is. The easiest way would be to put O-rings between MHS hilt sections and cinch it down really tight. The hardest parts are the emitter and switch hole. For the switch you would probably just epoxy it in. The blade would likely need to be permanently affixed, via epoxy again.
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
easy! just put to crystals!JK
that would be a good idea for building it. put two crystals to make it look real.
i think i saw an ultrasabers demo where they threw a couple of their stunts in the pool
...YUP!
Yeah, I saw that, but those were their PVC sabers. Not made of several metal parts screwed together.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Cardcollector didn't say it had to be a mhs saber, but metal does look much better then PVC.
New to the forum: READ, READ, READ! it's the best way not to get flamed.
Time for a kirby dance <('-'<) (><) <('-')> (>'-')> (>'-'<)<('-'<) (><) <('-')> (>'-')> (>'-'<)
I was thinking of using sinktube.
Would it be possible with sound and a LED?
Who's up to the Callenge!!
Got a Question? There's a thread for that...
~Do what you can, with what you have, where you are.~Teddy Roosevelt
SollusVir everywhere else... FXsabers, Youtube, etc...
Sound, no. LED, yes.
Sound requires holes to let the sound out. A waterproof saber has to be sealed.
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
Posting Permissions
Reply With Quote
Bookmarks