The first of the three looks the best to me.
The first of the three looks the best to me.
New to the forum: READ, READ, READ! it's the best way not to get flamed.
Time for a kirby dance <('-'<) (><) <('-')> (>'-')> (>'-'<)<('-'<) (><) <('-')> (>'-')> (>'-'<)
Tehe, I wasn't actually trying to do that, but the first saber does seem to scream to me the most.
New to the forum: READ, READ, READ! it's the best way not to get flamed.
Time for a kirby dance <('-'<) (><) <('-')> (>'-')> (>'-'<)<('-'<) (><) <('-')> (>'-')> (>'-'<)
I'm thinking I like version 2 the best. It's not that it's a quarter of an inch shorter, I guess I just like that extra bit of detail choke style 2 provides.
Maybe I'll just buy both chokes and go with whichever one I prefer in person. It's not like they are super expensive.
Last edited by Obi-Ben; 03-17-2009 at 08:00 AM.
Do the third one with choke 2. If you want that switch you can have it machined and will look much better than on the ribbed section. And you'll have a ton of room. Choke 2 is by far the best in IMO.
"The Dark Side offers power for power's sake. You must crave it. Covet it. You must seek power above all else, with no reservation or hesitation." ~Darth Revan~
I dont like it cause its a sharp drop and seems really really uncomfertable.
Any intelligent fool can make things bigger and more complex. - Albert Einstein
Reaganomics not Obamanomics
No problemo! Lets just get our hands all calloused up. . To be honest I don't notice it all that much. I happened to have got one of the first batch were the threads were too tight. I was mindful to wear gloves the second time around trying to unscrew it.
"The Dark Side offers power for power's sake. You must crave it. Covet it. You must seek power above all else, with no reservation or hesitation." ~Darth Revan~
Damn, you all make good points. Too good of points. You're making it impossible to make a decision! I think I will just go with option 2. If that choke is too hard on my hands, I'll just replace it with the other style choke.
I'm still really indecisive. In this one I threw out the ribbed section altogether and replaced it with a 3" plain section with customized machining to give it similar ribs, but with a larger inside diameter, gives me more than enough room.
Last edited by Obi-Ben; 03-20-2009 at 12:49 PM.
Bookmarks