MHS sections...

**Jay-gon Jinn** · 03-06-2009, 07:22 AM

I would seperate the hilts from the extensions and the chokes. Chokes have their section. Then all of the other extensions from the 1.2" DF up through the 7" DF in their own section, basically creating three sections.

**Clockwork** · 03-06-2009, 07:40 AM

I would match the categories to those found on the MHS builder. Or if they end up changing make sure the MHS builder matches the sections. That way newbies will find it easy to navigate and move from the concept in MHS builder to reality.

**Hasid Lafre** · 03-06-2009, 07:49 AM

Style hilts, Extentions, Chokes

**FenderBender** · 03-06-2009, 07:53 AM

Hilts, extensions, chokes. Just my opinion.

**xl97** · 03-06-2009, 08:32 AM

yeah I agree.. (I guess i thought hilts already had their own section..but that was the MHS/Saber builder) LOL

so yeah all hilts (even the new fluted ones)
extensions
chokes

I also agree that the MHS builder should be updated to reflect these changes..

(easy XML edit/creation...copy/paste)

**Swordlord** · 03-06-2009, 08:50 AM

*Swordlord jumps on the bandwagon*

Categories (standard machining):
Hilts = 7"; DF threads; w/ switch holes
Extensions = Variable length; DF/MF threads; w/o switch holes
Chokes & Chambers = Variable length; DF/MF/DM threads; Variable OD/ID; Special Purpose sections
Sink Tube = Sink tubes; sink tube adapters; chrome end caps; etc
All other categories = no change