what is the best battery to use

[james3]

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">GeluKhanGharr - I've been thinking about a side sliding switch for a while too. It's just hard to find a switch that will fit well inside the box. And I'm not thrilled about the rivets I used to attach the box. Any suggestions on attaching the box so nothing shows on top?
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
What about mounting with flat head screws and then glue on a piece of tin,copper,brass,circuit board, etc. sheet over the mounts.

[xwingband]

Wow, he posted that a while ago.[] A two piece cover would probably work. 1 piece screwed onto the sliding switch then a 2nd more decrative piece to cover the screws glued on.

<center>
www.dewbackwing.com</center>

[james3]

yea, I just noticed that. oops.

[darkjedimaster07]

hey there ive been looking at buying the materials to make a saber for a while and i just wanted to know whats the bigest battery holder tcss sells that will fit in the mhs el hilt starter set thanks for the info

<font color="red">Zack</font id="red">

[xwingband]

Biggest how? in size or amount of batteries?

The MHS won't fit any of the AA's that have four in a square... otherwise the rest are fine.

<center>Read the FAQ or x-wing won't be happy.
Before posting did you check the Thread Index?.

</center>

[darkjedimaster07]

i wanted to be able to get 12v from the pack so iwas thinking an 8AA or 8AAA battery pack

<font color="red">Zack</font id="red">

[xwingband]

8AA will not fit the MHS. 8AAA will.

<center>Read the FAQ or x-wing won't be happy.
Before posting did you check the Thread Index?.

</center>

[darkjedimaster07]

cool thanx for the help

<font color="red">Zack</font id="red">