Some questions 'bout this...

**Lord_Jyensba_Lalne** · 04-08-2006, 07:15 PM

1. How do you get the sound from a Hasbro saber?
2. Is there a way to get sound without mometary switches?
3. Any specific inverters/battery numbers/types needed?
4. Are there any risks in using sound?(Frying, etc.)
5. Would this fit in a 1.5"x12" tube?
6. Is it even possible to put sound in an EL blade?(that's what I'm making)

I am fourteen years old, and not experienced with electronics. Please keep that in mind when I post.

**suit_man** · 04-08-2006, 07:29 PM

please, read. reading is something that will help noobies. lucky i got to you before xwing. you will find these answers and more in this forum already.

i am a nerd, if you don't like it, i will cut you with my lightsaber

**Do-Clo** · 04-08-2006, 07:40 PM

If you will follow the link posted below you will find the information you are looking for. Read the FAQ section and read the Thread Index, it is broken down into topics.

http://www.thecustomsabershop.com/sa...sp?FORUM_ID=12

Do-Clo

Don't make me destroy you...

**LAN-ED-TUL** · 04-08-2006, 08:44 PM

do the reading research, and if your still cornfused, then ask what you dont understand.

You dont know the POWER, of the dark side...

**Firebird21** · 04-09-2006, 10:21 AM

Links in my sig.

Have you read your Thread Index today?
FAQ

Official Designated TCSS Jester!

**Lord_Jyensba_Lalne** · 04-09-2006, 07:17 PM

Sorry, my masters. I will meditate on my mistakes.[

]

As I was taking up too much room in another topic(s), and since this topic is here, this is what the electronics inside my Qui-Gon Lightsaber look like...kind of. The colors of the lines are the colors of the wires on both my lightsaber and on the EL electronics.(by EL electronics, I mean stuff you get from TCSS)

So what do I do to get this combined with EL electronics?(cutting wires, fusing wires, etc.)

The stuff on the right is EL electronics, and the stuff on the left is from the lightsaber I have. See that I have labeled everything, so that you may specify what wire you are talking about, and the parts the wire connects too.

Also, Blue B and Black D are both perminately attached to the saber.

Hopefully you can figure out my beautiful drawing.[

]

**LAN-ED-TUL** · 04-09-2006, 08:06 PM

dude, ya got yer lefts and right cornfused. el is on right and lightsabers stuff on left. duh.

[img][/img]

You dont know the POWER, of the dark side...

**Do-Clo** · 04-09-2006, 08:40 PM

Since you don't really understand electronics the best thing for you to do is to remove the wires on the sound board that go to the led. Then install 2 switches one for sound and one for the el inverter. Install 2 battery packs one for your el blade and the other for your sound board and all will be well.

Do-Clo

Don't make me destroy you...