Thinking of installing a US 2.0 in a Saberforge hilt any ideas if it will support the cree xre led? (I know it's not listed on the specs, but I figured I would ask).
Thinking of installing a US 2.0 in a Saberforge hilt any ideas if it will support the cree xre led? (I know it's not listed on the specs, but I figured I would ask).
How can we be expected to think outside the box when we work in one?
Yes,
The XRE Forward Current spec is 700mA Max for Green
And 1000mA For Blue, Royal Blue and White
Both have a forward Voltage of
3.5V @700mA
Blue is 3.7V @ 1000mA
Use the Lux III Setting for Blue, Green, White, and the Lux V setting for Green
http://www.cree.com/Products/pdf/XLamp7090XR-E.pdf
Page 4 is the place to look.
Thanks DM, as allways you are AWESOME!
How can we be expected to think outside the box when we work in one?
heheh, this is a prime example of why it would have been better to specify CURRENT target values in the USv2 setup menu, versus specific LED brands.
I mentioned this back in the USv1 days (as did others), but... I'm pretty certain it was deemed unimportant or just not much of a high priority due to all the other clouds that were hanging over v2's release!!! :P
~~ GREYTALE NOVASTAR (Writer, Director, Choreographer, Sound Designer, Actor, Saber Designer, Vocal Artist)
~~ Balance of Power, EP I: "Into The Lion's Den"
~~ Balance of Power, EP II: "Ashes of The Phoenix"
~~ The Crystal Focus Sound CD Compendiums... are HERE! ~~
~~ Nova & Caine's Staged Combat System... comin' SOON!
~~ Crystal Focus Wiring Guide
Bookmarks