I was wondering, the Pipe Cutter on the website, will that actually cut a 1 1/2" sink tube? It says up to 1 1/8" so I'm kind of doubting it. Thanks!
Randy
I was wondering, the Pipe Cutter on the website, will that actually cut a 1 1/2" sink tube? It says up to 1 1/8" so I'm kind of doubting it. Thanks!
Randy
Never tried but it does say only up to 1-1/8" so I doubt it would also.
Tim
The Custom Saber Shop
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Strydur
Never tried but it does say only up to 1-1/8" so I doubt it would also.<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
Maybe he should use the BFH9000, That generally works on anything.[]
Although, I can't seem to get the Tap attachment to work correctly! I just keeps cross threading.
[]
Have you read your Thread Index today?
FAQ
I think you need something a little bigger like a Sawzall or of course the Ole Faithful like Firebird said.
"Only a Sith deals in absolutes. I will do what I must." - Obi-Wan Kenobi
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by james3
I think you need something a little bigger like a Sawzall...<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
I have a cordless Sawzall!!! That thing is almost as awsome as the BFH-9000! It definely blows away the BFH-8999...
I tryed bringing it into the Cut-Your-Own xmas tree place and they shunned it away. lol
Have you read your Thread Index today?
FAQ
18 or 24? I have the 18 Milwaukee but have used the 24 Dewalt a few times. They were afraid you'd show up the chain saws[]
"Only a Sith deals in absolutes. I will do what I must." - Obi-Wan Kenobi
18v Ryobi.
Nothing special, but it gets the job done! :Tim Allen Grunt:
Have you read your Thread Index today?
FAQ
...Wait a second...
So if it says it can only handle 1 1/8", what exactly is the point of selling it? Aren't nearly all hardware sabers made from 1.25-1.5" tubes?
I'm not an expert on tools, so maybe I'm overlooking something?
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by GrimaOllak
...Wait a second...I'm not an expert...<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
It's for the PolyC.
Most use the cut off wheel on the sink tubes. A pipe cutter can dent and scratch the chrome.
No that you couldn't use it... But Tim’s cutter is for the PolyC. To the best of my limited knowledge.
Have you read your Thread Index today?
FAQ
I think the main purpose for this is to make EL and LED blades. I pretty much made all but one of my EL's and the job is easy with a good pipe cutter.
EDIT: typing slow sucks. What Firebird said.
"Only a Sith deals in absolutes. I will do what I must." - Obi-Wan Kenobi
Bookmarks