OK, after much hardship and delay...My US2.0 Jedi Saber - Talon!
Here it is! It is a re-hash of some parts from my first saber with a new blade holder and all new electronics. The blade is a corbin-style show blade 36" long and 1" in diameter. LED is a Lux 3 Cyan and is set on the overdrive setting from the US2.0. Hilt is all MHS with a MPP style clamp. Switch is a Latching on/off Momentary switch with a bevel nut. Hilt is made up of blade holder #3 with choke #2 and 8 black o-rings, a 4" double female center section joined to a center section with milled slots and rubber grip set and pommel is a style 4. All that's lacking is a d-ring that I'm gonna drill and fasten to the side of the pommel and It'll be done! Let me know what you think!
Reply With Quote
Bookmarks