-
-
Council Member
That's it, Jase--you've hit it on the head. Although Eandori would be the best man to double/triple check with on that.
You can always meter it too, heheh!
I like your second pic too--that DOES really clean up the wiring.
-
Council Member
Jedi Council Member
That needs to be stickied or put in the wiring diagrams forum! Nice pic!
-
-
-
-
1200mah AAA? May I ask where you got those?
Also, what is your charging solution for this pack? Eandori's the expert on this, so much so that I'm seriously contemplating getting a complete setup from him.
'Would be nice to get some 1200mah though, instead of the 900mahs I have on hand...
-
Jedi Initiate
A note about soldering onto batteries:
The sides of the batteries are grounded. This is important to know in case a tiny droplet of solder gets away from you and connects the positive terminal to the side.
This happened to me (of course) and I am supremely lucky I still have use of my eyes as I was an absolute idiot and was soldering battery packs A) with no goggles on and B) in the middle of the desert at least two or three hours from a hospital by airlift. Had I not blinked at the right time things could have gotten VERY interesting.
Don't be like uncle Ghostbat kiddies, wear goggles, and if the battery pack gets really really hot then put it down and back away.
Now you know, etc etc etc GI Joe.
-
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks