Modular Hilt Systems
Here is our latest saber that is on ebay right now, we call it BALROG. It is most definately a Sith saber, and it looks like it'll kill you just looking at it
MHS parts lathed and PC'd in Solar Flat black and Translucent gold
Crystal Chamber Choke with real quartz crystal
Lethal Brass overlay (literally, you should have ssen me trying to polish this one)
FX Vader Board
NiMh 4.8V pack w/charger
Recharge port
Brass Covertec knob
Now the pics, enjoy at your own risk
Last edited by Lord Maul; 02-08-2009 at 11:10 PM.
If you're new, please take the time we all consider just as precious as you and READ!
GET LATHED!
Official BMF and LORD OF THE STRINGS
Exile
Exile
MHS main hilt
Custom aluminum shroud
Red-O LuxIII
CF v3.1
Recharge & low batt in pommel
Super Wet Black powder coating by Tim
...Tim (TCSS), Erv (Plecterlabs), Novastar (CuttingEdge)... Thanks and rock on
Last edited by strengthofrage; 02-10-2009 at 08:48 PM.
"Run when you have to, fight when you must, rest when you can."
Desire
Lux III Cyan
Hasbro sound
Here are two MHS based sabers I just finished. No illumination, built for dueling. The pointy shroud Jedi Loreen cut and the angled shroud pieces LDM made. I did final assembly.
Now for pictures! Note - they show minor scratches very well. In person they are barely there.
Last edited by Lord Maul; 03-25-2009 at 10:10 PM.
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
Chiaroscuro: MHS plus carbon fibre
MHS parts (some modified) plus carbon fibre rods/strips. Asymmetrical with the curved choke reflecting its cage.
Latest MHS
Pretty Simple Hasbro Sound, Royal Blue Lux III, 4.8v NiMH Batter pack some sink tube overlay and a couple of hours on the buffer.
Last edited by Ravage179; 03-28-2009 at 08:33 PM.
If it ain't burning I didn't do it!
Card carrying member of the FSM!
My first one.
My mhs saber with cf4.1 with rumble motor now has a p4 green.
Last edited by Darkside75; 04-17-2009 at 09:17 AM. Reason: Update
I bring you Aqua, the waterproof saber. It is a K2 green direct drive off of a 4.8V NiMH batter pack. In hilt recharge port. Ultrafilm blade.
Videos and more pictures can be found in this thread:
http://forums.thecustomsabershop.com...ead.php?t=8176
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
My first MHS saber - no name yet
The 'main body' is actually a 5" ribbed extension; the switch (guarded) is in the pommel. I really like the combination of the number 11 blade holder and the number 3 choke section. Royal blue lux 3 running off a buck puck being fed by 4xAAA battery holder, no sound. (The 4xAA holder does fit in the ribbed extension, but there wouldn't have been room for the buck puck...)
The blade is a 2 year old Ultrasabers FX blade (turned down to fit the MR sabers) which is why it looks a bit odd in the close up. It's what I had on hand; I'll be replacing it soon.
Posting Permissions
Reply With Quote
Bookmarks