My first custom sabre, off the shelf parts from TCSS, my custom Lux III controller, several hours of polishing, and the switch mount is a towel rail end (wall mount) which fits the switch without any mods.
The 'Glam' photo
enjoy.
My first custom, be gentle
My first custom sabre, off the shelf parts from TCSS, my custom Lux III controller, several hours of polishing, and the switch mount is a towel rail end (wall mount) which fits the switch without any mods.
The 'Glam' photo
enjoy.
The Nameless
Bling. Frills. A Jedi craves not these things.
I've wanted to build a utilitarian saber for a while now. MHS sink tube adapters connected to PVC. Direct driven by a 18650. MR Vader soundboard and a green Seoul P4.
Here's a mhs I made for a friend a couple years ago. Design taken straight from the TCSS front page animation only I switched the blade holder type.
after lots of reading...my very first saber is complete!
LUX III blue LED and '05 MR ROTJ Luke soundboard
It still looks kinda plain so I may add a bit to it later on.
MHS TruePurple Staff
MHS Staff with "Opression Stopping Purplicious Purple" done by Vader's Vault.
Hi all, new member here. I just purchased and received my MHS hilt parts and thought I'd post a pic. Because of limited funds I am building this saber a bit at a time, so I still need to get a switch, all the inner electronics, and a blade but I still love how it looks so far!
Hilt style 4 with standard switch hole
#16 Blade emitter
Pommel #3 v2
1 each double male connector and 2 inch double female to add a little length.
And here is what I want the hilt to look like when I am done...
"Genesis" first MHS lighsaber
.....
Last edited by desert jedi; 09-18-2014 at 04:20 PM.
Here's my latest MHS saber. Green P4 LED, Obi-wan 2010 SB, NMH rechargeable batteries. 4 xAAA (4.8v pack).
Last edited by Noyl Wendor; 06-23-2010 at 11:15 PM.
Jedi Master Rahm Kota Inspired lightsaber replica
TCSS MHS aluminum hilt
Condition: Weathered
Sound Card: Obi-Wan Kenobi Force Action saber
Loudspeaker: TCSS Premium Speaker
Power Supply: 4 AA 2600mAh NiMH Rechargeable battery
Blade: Led LED "Corbin style" Show blade 1" OD (36 inches)
Led Emitter Luxeon Rebel Star (Green)
Extras: Recharge port, Kill switch, DPDT red illuminated switch, Green LED indicator, and real leather Tsuka-Maki style hilt wrapping.
Warlord
MHS/Custom hilt
Hand sculpted rear grip
CF v4.31
Lux III R/O
Madcow SMD LED bargraph
3.7v 18650 Li-ion rechargeable setup
Halon Customs chassis setup
Korriban font by Madcow
http://s46.photobucket.com/albums/f1...rrent=Wvid.mp4
"Run when you have to, fight when you must, rest when you can."
Posting Permissions
Reply With Quote
Bookmarks