I just converted my MR Anakin ROTS to a CREE LED. I made the blade/LED holder and heat sink myself. It has the original sound card and a CREE blue LED. I was able to figure out the wiring by a wiring diagram on this forum. (Thanks Guys).
I just converted my MR Anakin ROTS to a CREE LED. I made the blade/LED holder and heat sink myself. It has the original sound card and a CREE blue LED. I was able to figure out the wiring by a wiring diagram on this forum. (Thanks Guys).
May the Force be with you.
I used the TCSS Conversion Kit, and White Lux III with Magical magenta Lee filter
Please stop with the pictures and hate mail. I neglected to resize them at first, but here they are resized. I just made a newb mistake and forgot to resize them.
Last edited by JediKnightBJ; 02-09-2009 at 10:32 AM. Reason: Image problems
Here is a quickie. Darth Morbius sent me a Yoda board (it was still in the hilt). We all know I can't waste anything so, I made my daughter her first personal saber from it (Birthday present you know!). She has always wanted a purple saber, so this is it! It does not (of course) come across in the pix, but it is a very nice purple.
Particulars:
Empty Yoda MR hilt
Yoda MR switch
Yoda MR battery connector and Batery pack
Prolite RGB resistored R>B
6' Poly-P wrap in MR blade
616 optics
Video:
http://s291.photobucket.com/albums/l...t=100_0467.flv
Pix:
Last edited by Lord Dottore Matto; 02-14-2009 at 12:19 PM.
All n00bs READ these first (PLEASE)!!!:1. LDM's Basic Saber-build Step-by-Step Tutorial 1A. Maul's Saber Dictionary 1B. THREAD INDEX 1C. Econo Sound Diagrams
TCSS the #1 Part supplier of LDM customsabers!
Annie EPIII and DV EP5
BEFORE>>>
After>>>>
Same EPIII Annie with changed color to yellow......
Mace Windu in the works now.... doing multi color..
Last edited by rogwilli; 05-05-2009 at 07:32 AM.
Here is my first MR Conversion. Its an anakin ROTS. With some custom touches
See main thread.
DSCN1776.jpg
DSCN1780.jpg
All n00bs READ these first (PLEASE)!!!:1. LDM's Basic Saber-build Step-by-Step Tutorial 1A. Maul's Saber Dictionary 1B. THREAD INDEX 1C. Econo Sound Diagrams
TCSS the #1 Part supplier of LDM customsabers!
I finally modified my Yoda in lux3, with the kit from TCSS
as soon as I can, I'll buy a Corbin Driver (I want a pulse effect )
All n00bs READ these first (PLEASE)!!!:1. LDM's Basic Saber-build Step-by-Step Tutorial 1A. Maul's Saber Dictionary 1B. THREAD INDEX 1C. Econo Sound Diagrams
TCSS the #1 Part supplier of LDM customsabers!
An MR Luke ANH stunt I gotten from Jay-Gon Jinn, with a few of my own personal touches. The previous owner that JGJ got it from seemingly abused it so there are scratches all around the hilt but that just adds more character! The D-ring was also repaired among other things.
The blade JGJ used is the original MR blade that has been upgraded by him with several feet of polypropylene. Makes the blade more evenly lit.
Things I tweaked on it was I replaced the plastic red button screw and plastic glass eye screw with the replica metal versions from the store, tweaked the switch so it takes a bit more pressure to move, and the trademarks are gone.
twitch.tv/sigfreda
All n00bs READ these first (PLEASE)!!!:1. LDM's Basic Saber-build Step-by-Step Tutorial 1A. Maul's Saber Dictionary 1B. THREAD INDEX 1C. Econo Sound Diagrams
TCSS the #1 Part supplier of LDM customsabers!
Bookmarks