-
Sith Lord
Recheck all your connections and wiring and you should be able to fix your problem, most problems are in the wiring and they can drive you crazy finding them.
Do-Clo
Don't make me destroy you...
-
yeah, it is probably the wire only holding by the plastic sheathing. like firebirds prob was. just look closely at the wiring. these lil wires tend to break easily if moved around too much. happened to me on one project before.
You dont know the POWER, of the dark side...
-
Sith Acolyte
i think i know what it is the wires that go from the battery pack contacts to the board have hot glue on them from the factory with, my anakin mr the glue came loose from dueling then it would flicker and sometimes i would position the pack like you did firebird then the sound would be off and the blade fully bright.so see if the glue is loose if it is then get more and glue it,careful when i did this the hotness of the glue made the solder warm and the wires pulled out. hope it helps
"aaah general kenobi you are a bold one."-general grievous
-
Jedi Council Member
-
Sith Acolyte
did it work?[?]
"aaah general kenobi you are a bold one."-general grievous
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Official Designated TCSS Jester!
Reply With Quote
Bookmarks