This may be a dumb question, but the wiring diagram have lead me to wonder. Do you have to close the loop to get the wire to work? (i.e. strip and solder both ends of the wire)
This may be a dumb question, but the wiring diagram have lead me to wonder. Do you have to close the loop to get the wire to work? (i.e. strip and solder both ends of the wire)
nope, just make sure you do a good connection on the one end of the wire that you are connecting to the plug and you are good to go.
"Only a Sith deals in absolutes. I will do what I must." - Obi-Wan Kenobi
Yeah, you can solder individual strands, but the more strands soldered that way the more connections you have to worry about breaking.[B)]
<center>Read the FAQ or x-wing won't be happy.
Before posting did you check the Thread Index?
Want to roleplay in the SW universe? Visit:
</center>
I wonder if closing the loop would go bum-bum?!? Hmmm....
Born of Sith, seduced by the light.
![]()
Just so I am clear on which of the shown ways is correct or are both them correct? (See Pic)
I had to use my sith powers to draw that, so no laughing..![]()
Your top diagram with one end connected is the proper way to hook it up.
Do-Clo
Don't make me destroy you...
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by TK938
I had to use my sith powers to draw that, so no laughing..
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
At least it's color coded! And I can easily see what you're getting at.
I was wondering that myself. I read in another thread that the second way will fry something, but I don't see how the first one will work...
I have no experience with EL at all, so I don't know how it works, specifically.
Have you read your Thread Index today?
FAQ
![]()
![]()
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Do-Clo
Your top diagram with one end connected is the proper way to hook it up.<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
Do you connect the wires at the open end? Or do they stay separate?
Have you read your Thread Index today?
FAQ
![]()
![]()
The wires remain seperate on the open end of the el wire.
Do-Clo
Don't make me destroy you...
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Do-Clo
The wires remain seperate on the open end of the el wire.<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
So, how does it complete the circut? Or does it have to?
Have you read your Thread Index today?
FAQ
![]()
![]()
Bookmarks