Just got my DM FX!
Very sturdy feeling, maybe a more "finished" feel. Very clean. The blade doesnt seem too feel loose in the hilt. The red and silver buttons are aluminum, 2 Rubber o rings.
More observations and my plans!
A red LUX is going into this sucker one day soon.
Three of the buttons look like they are glued on and pushed in the hilt. They should pull right off. The on off button has a set pin. The emitter has 2 set pins. My guess is the emitter will screw off once the pins are removed. I hope its one pin that will push through. The small pin in the on/off button is small and might be hard to remove.
The two LEDs are clear. They should be no problem to remove and replace with working ones.
The battery holder is about the same as the other FX sabers
The endcap is cool looking. Very light feeling. The Red crystal is held in place by 3 screws. Plenty of space in the cap for an led to light the crystal up. I'm going to also "weather" the outside of it.
Give it a lightsaber cut look.
I'm thinking one could make a Bastardized Maul (with a little work).
If you got one, post your thoughts.
My wife has our camera so I can't take pictures now but I will when she gets home around 5:30 or so.
Bookmarks