Does the diffuser go inside the polycarbonate thin walled polycarbonate.
Does the diffuser go inside the polycarbonate thin walled polycarbonate.
Yup. Roll it and slide it into the polyC tube. If you have the nylon diffuser you don't even need to roll it.
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
Is it corbin's film? I didn't know Tim pre rolled those. In that case just slide it into the polyC
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
Cani hot glue the optics together or super glue or any type of glue it doesnt stick very well i got them they didnt fit i trimmed them down and they still dont fit good...
Don't use superglue whatever you do. Hot glue works. I haven't ever glued my optics. I just trim them a little and then when I put the blade holder on it clips the holder and optic together.
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
Bookmarks