Hehe.... breaking the 1K lumen barrier

[acerocket]

Yes and no. I still have the blanks to make 50 of them, but when the tri-rebels came out, people's interest in them pretty much died out. To bad the tri-rebels never really caught on and a decent optic was not introduced. One other problem was that these are a 1.25" od unit and most people don't want something that big - everyone asked if I could make it fit a 1" bore (the answer is still NO). If people are still interested, then maybe someday I will revisit them.

[Malaki Skywalker]

Well, now we have the Rebels with a CR@P optic, how about mounting 3 rebels with there single optics on there, will it work? Because I think it would gain plenty of interest. Another thing is with the Rebels size, a more compact version could be put together?

[acerocket]

Do you have a link for the rebel optics? My understanding was the ones I have in the unit now are the smallest optics available (just about .5" in diameter).

[Malaki Skywalker]

Do you have a link for the rebel optics? My understanding was the ones I have in the unit now are the smallest optics available (just about .5" in diameter).

Heres the link: http://www.led-tech.de/en/High-Power...9_106_108.html

As you can see the specs say:
Height:11.35mm
Length:17.55mm
Depth: 15.20mm

But the thing is, Rebels work with the standard optics, but NOT the standdard optic mounts, so the optics you use should be ok

Can you come up with something?

[Ari-Jaq Xulden]

well i found a reflector like what ultra uses that i belive would work for a rebel star.http://carclo-optics.co.uk/catalog/p...b1dff9ef8b837f and i dont know if corbin had shared this with you yet ace but in hopefully 3 weeks i will have an my hand this http://lumileddriver.com/RebelCircle...nmentLarge.jpg im hoping that the optics shared above may be able to be reworked in a trilux setup to work with it.