Results 1 to 5 of 5

Thread: Question on the diffuser material

  1. #1

    Default Question on the diffuser material

    Hi all!

    I've read through the tutorial (http://forums.thecustomsabershop.com...hread.php?t=12) on building the EL blades, simple enough.

    One question though, that I didn't come across in my forum searches, is where does the diffuser material come in? Do I wrap the innermost poly blade in it?

  2. #2

    Default

    This is what is sold as a diffuser for the EL blades:
    http://www.thecustomsabershop.com/HD...ene--P163.aspx
    Your EL wire then goes inside the polethylene.

    That slides into this:
    http://www.thecustomsabershop.com/34...ong--P154.aspx

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.

  3. #3

    Default

    Ok, so somehow I ended up purchasing the diffuser for the LED blade. DOH.
    Does the same material create any kind of coring effect for an EL?

  4. #4

    Default

    Quote Originally Posted by ThreeQuadFive View Post
    Ok, so somehow I ended up purchasing the diffuser for the LED blade. DOH.
    Does the same material create any kind of coring effect for an EL?
    I'd have to say no....but try it and find out! I'm going to guess that unless you have several wraps worth of the Corbin film, you'll be able to see the EL wire through it.

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.

  5. #5

    Default

    I have a few extra EL diffusers lying around and I could use an extra LED diffuser. If you feel like trading, PM me. My EL diffusers are cut to 34.5".

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •