Noob Question :>
You dont get a sink tube in this kit right?
Noob Question :>
You dont get a sink tube in this kit right?
Nope..this is just the electronics listed.
Welcome to the forums.
Tim
The Custom Saber Shop
Ok thanks i cant find this blade holder anywhere in the shop
Last edited by vilsevalle; 12-13-2008 at 06:21 PM.
We have not sold that setup for a long time.
What you can do now for a LED sink tube setup is to either use a MHS blade holder and then a MHS to sink tube adapter along with a 1.5" sink tube OR you can use the 1.25" sink tube along with the 1.25" LED sink tube blade holder.
Tim
The Custom Saber Shop
Hmm ok thanks so would this work for a Led Hilt?
1-1/2" x 12" Chrome sink tube
1-1/8" Chrome end cap
Screw on LED blade holder style 10
MHS to 1.5" sink tube adapter
Luxeon III / Seoul P4 Electronics Kit
Last edited by vilsevalle; 12-13-2008 at 06:39 PM.
Not the 1/8" caps - The 1 3/8" end cap goes with the 1.5" sink tube.
Otherwise everything else is rock & rollable
The 1 1/8" end caps would be for the 1.25 sink tubes.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
He's getting the "inch and a half" sink tube
ha, and to think I just called out the perfectionist!
I know what he's getting. I was just pointing out what the other size end cap he originally had on his list is for.
Silly.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Bookmarks