OK I have done a couple of DIY's from ULTRA but I am definitely a newbie. I gutted a Yoda sabers soundboard and am trying to install it into my new MHS. Here is the problem:
I have wired the negative from the LED to the bundle of wires. I have wired the positive to the outside two wires. Now when I attach the battery pack the LED automatically comes on. The on/off switch is wired to the two ON/OFF wires from the soundboard and when turned on the sound comes on and intensify the LED's brightness.
Anybody have any words of help as to why the LED is on all the time and how to correct (ie to enable to LED to corresponde to the ON OFF switch)?
Thanks!
Bookmarks