also the cree is alot smaller (lense is about 5mm) and the P7 is like 8mm so you can't use them... I'm about 99% sure I bought that item and it didn't fit.
also the cree is alot smaller (lense is about 5mm) and the P7 is like 8mm so you can't use them... I'm about 99% sure I bought that item and it didn't fit.
http://www.youtube.com/watch?v=JVMrRb2WyCk
Guys voice cracks me up.
That's rather rude, bzylman.
It sounds to me like he might have some sort of dental appliance in his mouth.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Create a circuit for the P7 with a good heat sync, using two CR123 batteries.
Get that working good.
Get your lightsaber set using whatever drive you want and wire in a LED at lower lumens to power a crystal chamber. Basically, replace the lux or cree or p4 with a lower lumen led and the same voltage. Get that working the way you want with sound, pulse, vibration motor or whatever else.
Do a protected switch to power both on at the same time and the tricky part is to do a crossover to get the pulse to alter the current going to the p7. This is the part that I can't seem to find. You need to protect the soundboard from back chat. Thats also a tricky part.
I think that will work better.
It's called a heat sink, you're not synchronizing anything to/with it.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Excellent find BF.
I'M JUST A SPY(LOL)
Bookmarks