Results 1 to 3 of 3

Thread: Help with hasbro soundboard

  1. 11-03-2007, 01:51 PM #1
    Chuber
    Chuber is offline
    Join Date
    Mar 2006
    Location
    Argentina
    Posts
    38

    Default Help with hasbro soundboard

    I was working on my hasbro soundboard when the positive input wire (yellow one) that goes to positive in baterry pack, was pulled of the board... What should i do? Because i can not find any contact in the tiny hole and if i touch the soldering that is on the back of the board with the wire it doesnt work... Anyone can help me? Thanks
    Reply With Quote Reply With Quote
  2. 11-03-2007, 05:21 PM #2
    Jay-gon Jinn
    Jay-gon Jinn is offline
    Council Member
    Jedi Council Member     Jay-gon Jinn's Avatar
    Join Date
    Jan 2007
    Posts
    3,740

    Default

    Strip the end of the wire and heat up the solder on the board and push the wire through the hole and into the solder. That should re-connect the wire to the contact in the board, and push out the wire piece that is still held in the solder.

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
    Reply With Quote Reply With Quote
  3. 04-04-2008, 04:08 PM #3
    Pullo
    Pullo is offline
    Youngling Pullo's Avatar
    Join Date
    Apr 2008
    Location
    England
    Posts
    159

    Default

    Same thing happened to me, Problem is I can't remember which hole it came from. Any on help with a pic or something. Obi wan ROTS model.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules