Hey guys,

I know this is probably just a matter of taste, but are there any particular settings that are "popular" for getting a nice, clean smoothswing on the CFX? I'm using standard blade, NOT a Neopixel. Orientation of the board is "Top/Front" as described in the manual

Currently, the configuration that came with the font I purchased are as follows (in the font file):

## SMOOTHSWING parameters
smooth_sharp=3.0
smooth_gain=100
smooth_width1=60
smooth_width2=180
smooth_sens=250
smooth_physics=950
smooth_dampen=80
smooth_mode=2

Here is the stock config section:

## Motion Settings
gate=50
smooth_gate=50
hclash=850
hswing=450
hslash=400
hhybrid=550
hforce=300
hfclash=650
hstab=500,-20,20
hspin=750
htwist=350
hdrag=500,-90,0
htemp=40
spectrum_mode=0
spectrum_axis=0
field=10,10,10

Thanx in advanced!