Quote Originally Posted by Hootini View Post
My CF 4 comes back on upon pressing the button to turn it off. It turns off and then just comes back on upon releasing the button. However it works fine for novastar only. It does this on all the other configurations. Any insight would be appreciated. Thanks
Strange that one of the fonts works and the others don't... which leads me to believe that the switch settings for Novastar (on the default v4's sent out) was set to (let's say) "switch=X" whilst the other fonts were all "switch=Y".

Whatever the switch is set to in Novastar (which works for YOU)... that is what the other fonts need to be set to for your configuration. So, you can try this:

* Remove the SD card from CF
* Plug it into your computer, access the files
* Copy the files to a folder on your computer
* Edit the config.txt files and make them all reflect the same switch value (the correct 'Novastar' one)
* Format your SD card. It's safe now, since you made a copy of its contents!
* Copy all of the files from your folder on the computer EN MASSE to the newly formatted SD card
* Replace the SD card into CF
* Done. Test. Joy!

Good luck!